Abstract
Elementary Mn has a great importance as neutralizer of Fe intermetallics like β-Al5FeSi, which have detrimental effect on mechanical characteristics of AlSi alloys. Presence of Mn in AlSi alloys causes the formation of other intermetallic phases. To understand the effect of solidification conditions and fluid flow on the microstructure of AlSi-based alloys and the addition of Mn leading to Mn-based intermetallics, Al-5 wt pct Si 0.2/0.4/1.0 wt pct Mn alloys have been directionally solidified under defined thermal (gradient 3 K/mm, solidification velocity 0.02-0.12 mm/s) and fluid flow (rotating magnetic field 6 mT) conditions. The primary Al-phase and Mn-based intermetallic phases were studied using 3D X-ray tomography. The spatial morphology of primary phase and intermetallics were characterized with respect to different fluid flow and solidification conditions. The tomography has showed the 3D complicated structure of Mn phases developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.