Three-dimensional, gas phase fuel cell with a laccase biocathode

Abstract

A fuel cell using an enzymatic biocathode operating in a gas phase mode is reported. The electrode was prepared using a three-dimensional conductive electrode matrix. An enzyme solution containing laccase and a mediator was distributed into a hydrophilic matrix of carbon felt fibers creating a porous gas-flowing electrode. A Pt-based gas diffusion electrode served as the anode. A maximum power density of 9.4 W m −2 (2.9 kW m −3) was obtained with 15 U of enzyme cm −2, with hydrogen as the fuel. Power density was found to be a function of the enzyme loading, air flow rate, volume of the liquid phase and the humidity of the air stream. The ability to use methanol and ethanol as vapors in gas phase was also shown. The introduction of three-dimensionality into the electrode architecture and operation of the fuel cell in a gas phase mode to supply the fuel and the oxidant demonstrates an avenue for improving the power density of EFCs.