Abstract
The aim of the study was to compare the stress distribution around implant in different bone qualities of D1, D2, D3, and D4 with straight and angled abutments using three dimensional finite element analysis. A three dimensional finite element model of the premaxilla region, and two solid 4.3×10mm implant, one with a straight abutment and the other with an angled abutment was done. Four distinctly different bone qualities of D1, D2, D3, and D4 were made. A static load of 178N was applied at the centre of incisal edge along the long axis of each abutment. The maximum equivalent von Misses stress values around the implants were recorded. The distribution of stresses changed considerably with abutment angulation. As angulation increased from 0° to 15° the concentration of Von Misses stresses shifted to the cortical layer of bone on the facial side of the fixture. Although Von Misses stress increased in straight abutment as the bone quality changed from D1 to D4, it was more noticeable under the loading side of the angulated abutments. The high stresses induced through angled abutments at the cervical zone of the implant due to forces and moments could be a dominant factor that may aggravate the peri-implant bone loss or changes the existing peri-implantitis direction.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
