Three-dimensional directional cellulose-based carbon aerogels composite phase change materials with enhanced broadband absorption for light-thermal-electric conversion

Abstract

Energy shortage, environmental and ecological issues have prompted a focus on effective solar energy utilization. Using composite phase change materials (PCMs) as an energy storage medium is an important method to achieve efficient solar energy conversion. Biomass materials are highly desirable for solar applications due to their wide range of sources, low cost, environment-friendly, and natural porous structure. In this study, cellulose is selected as a carbon source precursor. Three-dimensional (3D) directional cellulose-based carbon aerogels (CBCA) are constructed through an immersion expansion, orientation, freeze-drying, and carbonization process. Taking tert-butanol/ deionized water as co-solvent, the aerogel shows high specific surface and productivity as well as low structural shrinkage. 3D directional graphitized porous network and graphene guarantee excellent broadband absorption, efficient heat transfer pathways, and effective thermal storage ability. Stearic acid (SA) and graphene are melt blending, followed by a vacuum-impregnating process for the formation of 3D composite PCMs. The thermal storage capability of PCMs is greater than 96%, accompanied by the highest thermal conductivity of 1.17 W/(m·K) with 0.5 wt% graphene. Moreover, the highest light-thermal conversion efficiency can reach 90.3%. It also has a maximum light-thermal-electric energy conversion output power of 1.80 mW. This work provides a feasible, economical strategy for highly efficient solar energy storage and thermal energy utilization.