Abstract
The present study aims to clarify the development of blocks and packets in lath martensite in Fe–18Ni maraging steel using three-dimensional observations. The specimens were step-quenched in order to clarify the sequential development of the three-dimensional morphology in a prior austenite grain. In a prior austenite grain, we found that five independent packets formed during the early stage of martensitic transformation. Four of the packets exist along the prior austenite grain boundaries and one packet grows from the boundary edge into the prior austenite grain. Each packet consists of a single block, although the fraction of martensitic transformation is 50.6%. The observed rules of the block-selection are as follows: (1) the blocks have near Kurdjumov–Sachs orientation relationship with adjacent austenite grains and elongated directions of the laths are parallel to adjacent grain boundaries and (2) transformation shear directions of the laths are parallel to adjacent grain boundaries.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
