Abstract

ABSTRACTVertical anchor plates are often provided to increase the performance of various geotechnical engineering structures such as sheet pile walls, bulkheads, bridge abutments and offshore structures. Hence, the safe design of such structures needs a better understanding of the 3D behaviour of the anchor plate. This paper presents and discusses the results obtained from a series of 3D finite-difference analyses of vertical square anchor plate embedded in cohesionless soil. The 3D model is found to closely predict experimental pullout load–displacement relationship. The failure mechanism observed in the numerical model is found to be very similar to the failure reported in experimental studies. For a given embedment depth, the stiffness of the breakout factor–displacement response substantially reduces with increase in anchor plate size. However, the ultimate reduction in anchor capacity is found to approximately 8% with an increase in anchor size from 0.1 to 1 m. Numerical analysis reveals that at deeper embedment depth, the friction angle of sand is the critical parameter in enhancing the performance of anchor plate. The obtained 3D model results are then compared with the published results and are found to be reasonably in good agreement with each other.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call