Abstract
Progress in device engineering and surface passivation strategies has led to steady progress in colloidal quantum dot (QD) solar cells. Bulk homojunction (BHJ) device architecture has several advantages over the conventional planar junction in developing QD solar cells. Herein, surface ligand chemistry is utilized to control the doping type and dispersibility of oppositely doped PbS QDs to develop BHJ solar cells. Thiocyanate and thiol ligand combination is introduced to develop p‐PbS QD ink, which is blended with halide‐passivated n‐PbS QDs to build BHJ solar cells. It is shown that BHJ solar cells are benefited from high energy offset and higher hole mobility. This leads to the superior carrier extraction from a thicker active layer without compromising fill factor and open circuit voltage. Power conversion efficiency has reached 10.7% in 530 nm‐thick BHJ solar cells, a 24% improvement over the best performing planar solar cells. With the help of the 1D solar cell capacitance simulator, it is shown that a 15% efficient QD solar cell can be realized by further improving the hole mobility above 0.1 cm2 V−1 s−1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.