Thin Films Growth of SnO_2:F/CdS/CdTe, and Studies of Their Physical and Optical Properties using Spray Pyrolysis Techniques

Abstract

Fluorine doped tin oxide, Cadmium Sulphide and Cadmium Telluride thin films have been deposted on Soda Lime glass substrate at respectively by spray pyrolysis (SP) technique and are important semiconductor materials in optoelectronic devices such as optical sensors, light-emitting diodes, transistors and photovoltaic cells. thin films were characterized by various techniques such as X-ray diffraction, SEM and optical studies. X-ray diffraction measurements show that the deposited was found to be of cassiterite type with tetragonal rutile structure, observation of peaks of different planes on an X-ray diffraction graph of thin film showed that film obtained were cubic structure. The main peak value of thin film is seen at , which is the characteristic peak of the compound and the film structure was obtained at the major peak indicating the preferred orientation of films along direction. This confirms the formation of thin film, with (111) as the strongest preferred plane of orientation. The surface morphology of the thin films was analysed by scanning electron microscopy (SEM). The optical energy band gap of thin films are determine The results showed that the prepared FTO, CdS and CdTe films can be used in solar energy applications.