Abstract

This paper describes a proof-of-concept deformable mirror (DM) technology, with a continuous single-crystal silicon membrane reflecting surface, based on <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$ PbZr _0.52 Ti_0.48 O _3$</tex> (PZT) unimorph membrane microactuators. A potential application for a terrestrial planet finder adaptive nuller is also discussed. The DM comprises a continuous, large-aperture, silicon membrane “transferred” onto a 20 <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$,times,$</tex> 20 piezoelectric unimorph actuator array. The actuator array was prepared on an electroded silicon substrate using chemical-solution-deposited 2- <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$mu m$</tex> -thick PZT films working in a <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$d _31$</tex> mode. The substrate was subsequently bulk-micromachined to create membrane structures with residual silicon acting as the passive layer in the actuator structure. A mathematical model simulated the membrane microactuator performance and aided in the optimization of membrane thicknesses and electrode geometries. Excellent agreement was obtained between the model and the experimental results. The resulting piezoelectric unimorph actuators with patterned PZT films produced large strokes at low voltages. A PZT unimorph actuator, 2.5 mm in diameter with optimized PZT/silicon thickness and design showed a deflection of 5.7 <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$~mu m$</tex> at 20 V. A DM structure with a 20- <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$mu m$</tex> -thick silicon membrane mirror (50 mm <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$times,$</tex> 50 mm area) supported by 400 PZT unimorph actuators was successfully fabricated and optically characterized. The measured maximum mirror deflection at 30 V was approximately 1 <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$~mu m$</tex> . An assembled DM showed an operating frequency bandwidth of 30 kHz and an influence function of approximately 30%. 1738

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call