Abstract
This project involves further work on a process developed to make very thin film CdS/Cu/sub 2/S solar cells. The process is adapted to the float glass process and consists of spraying suitable chemicals on a moving ribbon of glass which floats on a bath of molten metal. The spraying produces the necessary thin films (with suitable optical and electrical properties) of SnO/sub 2/, CdS and Cu/sub 2/S. The CdS films produced are two to three microns thick, thus conserving the use of cadmium. The estimated cost per peak watt is approximately 7 cents (1975 costs) at 5 percent efficiency and an output of 37.6 x 10/sup 6/ square meters annually. The cells are blackwall cells. A float glass plant modified for the process is shown schematically. Research progress is described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have