Thin Film Based Membrane Electrode Assemblies for Solid-State Ammonia Synthesis

Abstract

Ammonia is the of the most crucial chemicals and currently primarily produced through the Haber-Bosch process causing the industrial ammonia production to emit more CO2 than any other chemical-making reaction. While the current primary function of ammonia lies within the fertilizer production, it can also be directly used as a fuel for power generation or in the maritime industry. Compared to hydrogen, ammonia has superior storage and transportation capabilities due to its greater volumetric energy density and mild conditions for liquefication. Given the need of reducing global carbon emissions, ammonia could be synthesized electrochemically using air, water and electricity by the Solid-State Ammonia Synthesis (SSAS). Protonic ceramic cells operate within an intermediate temperature regime of around 450 - 550 °C which is well suited for this process. Within our work, we present a tubular membrane electrode unit entirely made of ceramic components based on a barium zirconate thin film electrolyte. An ammonia production rate of 9.06 × 10-10 mol s-1 cm-2 and a Faradaicefficiency of 6.58% were achieved using a NiO-BaZr0.7Ce0.2Y0.1O3- δ | BaZr0.8Y0.2O3- δ | Ru@Ba0.5Sr0.5TiO3-δ cell.A key innovation lies in the production of dense BaZr0.8Y0.2O3-δ electrolyte layers, ranging from 1 to 5 µm in thickness, utilizing a Closed-Field Unbalanced Magnetron Sputtering (CFUMS) process. This technique allows precise adjustments of stoichiometric ratios within the perovskite structure, offering improved sputtering yields compared to conventional methods. Furthermore, the crystallinity, phase purity, and microstructure of sputter-deposited thin films are enhanced through selective laser annealing (SLA), resulting in high-density films composed of single-phase BaZr0.8Y0.2O3-δ with average crystallite sizes of 200 nm while avoiding substrate damage from thermal stress. Electrochemical performance was evaluated through impedance spectroscopy, half-cell tests and full cell tests providing insights into the efficacy of the developed tubular membrane reactor for the electrochemical synthesis of ammonia. The results demonstrate the feasibility of utilizing ceramic proton conductors in SSAS, particularly highlighting the potential of high-pressure operation up to 80 bars in tubular cells at relatively low temperatures around 450 °C, thereby achieving attractive NH3 production rates.This research contributes to the evolving landscape of sustainable ammonia synthesis by presenting a novel approach that integrates advanced materials and manufacturing techniques. Electrification and decentralization of the ammonia supply chain will expand the market by supporting its current use as fertilizer source and enable a new route as green energy carrier paving the way for an ammonia-based economy. Figure 1