Abstract
The characteristics of 10 kohm/sq. thick-film resistors (2041, Du Pont and 2341-B, ESL) fired on tetragonal ZrO 2, low-temperature cofired ceramic (LTCC) and dielectric-on-steel substrates were investigated with the aim of determining the compatibility of these resistor materials, which were developed for firing on Al 2O3, with other substrates. Possible interactions between the thick-film resistors and the substrates were investigated. Sheet resistivities, temperature coefficients of resistivity, noise indices and gauge factors (GFs) were measured. The results indicate that the 2041 and 3414-B thick-film resistors could be used on the evaluated substrates if an allowance is made for the increased temperature coefficient of resistivities (TCRs) of both resistor materials on the zirconia substrates and for the increased sheet resistivities and TCRs of the 3414-B resistors on the LTCC substrates. © 2003 Elsevier B.V. All rights reserved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
