Abstract

Ionic liquids, which are classified as new solvents, have been identified to be potential solvents in the application of CO2 capture. In this work, six ammonium-based protic ionic liquids, containing ethanolammonium [EtOHA], tributylammonium [TBA], bis(2-ethylhexyl)ammonium [BEHA] cations, and acetate [AC] and butyrate [BA] anions, were synthesized and characterized. The thermophysical properties of the ammonium-based protic ionic liquids were measured. Density, , and dynamic viscosity, , were determined at temperatures between 293.15 K and 363.15 K. The density and viscosity values were correlated using empirical correlations and the thermal coefficient expansion, p, and molecular volume, Vm, were estimated using density values. The thermal stability of the ammonium-based protic ionic liquids was investigated using thermogravimetric analyzer (TGA) at a heating rate of 10 C.min‒1. The CO2 absorption of the ammonium-based ionic liquids were measured up to 20 bar at 298.15 K. From the experimental results, [BEHA][BA] had the highest affinity towards CO2 with the mol fraction of CO2 absorbed approaching 0.5 at 20 bar. Generally, ionic liquids with butyrate anions have better CO2 absorption than that of acetate anions while [BEHA] ionic liquids have higher affinity towards CO2 followed by [TBA] and [EtOHA] ionic liquids.

Highlights

  • Natural gas consists mainly of methane as well as other higher alkanes in varied amounts

  • All the ammonium-based protic ionic liquids exist as liquids at room temperature except [BEHA][AC], which is a solid

  • Six ammonium-based protic ionic liquidswere weresuccessfully successfully synthesized synthesized via ionic liquids viasolvent-free solvent-free1-step

Read more

Summary

Introduction

Natural gas consists mainly of methane as well as other higher alkanes in varied amounts. It is mainly used as a fuel and as a raw material in petrochemical industries [1]. While natural gas is principally a mixture of combustible hydrocarbons, many natural gases contain impurities, such as carbon dioxide, CO2 , hydrogen sulfide, H2 S, and water. Refining processes are required to remove all of these unwanted impurities from natural gas. Besides water and higher-molecular-weight hydrocarbons, one of the most crucial parts of gas processing is the elimination of CO2 and this process is normally done by means of chemical absorption techniques using alkanolamine solutions. Despite the successful practice of using alkanolamines for CO2 removal, several disadvantages have

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call