Abstract
The paper presents results of an analysis carried out using the governing equations to compare the heat transfer performance of a uniformly heated flat plate with longitudinal fins, which form multiple rectangular air flow passages in parallel below the plate and cover whole of the passage surface, with that of the low aspect ratio rectangular duct typical of conventional flat plate solar air heater at equal pumping power under laminar flow conditions. The heat transfer rate at equal pumping power for the plate with 1 mm thick steel fins at pitch of 25 mm and 40 mm is found to be about 2.7 and 2.5 times, respectively, over the duct without fins. The heat transfer study is followed by thermo-hydraulic performance study of the solar air heater with absorber plate having longitudinal fins forming multiple rectangular air flow passages in parallel. The finned solar air heater with low air mass flow rates has been found to provide 28–31 % better thermal efficiency than the conventional solar air heater at equal pumping power. The results of the study can be utilized for the development of enhanced performance finned solar air heater operating with low air mass rates to deliver high temperature air.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.