Thermohydraulic performance assessment of a solar air heater with equilateral‐triangular, trapezoidal, and square sectional ribs on the absorber plate: A comparative study

Abstract

AbstractHeat transfer systems have been employed in numerous industrial and residential settings to convert and recover heat. One effective approach for enhancing heat transfer rates involves incorporating artificial roughness in the form of regularly spaced ribs on the heated surface. In this particular study, the researchers conducted numerical simulations to analyze the turbulent heat and flow properties within a rectangular duct of a solar air heater (SAH). The duct featured three different types of transverse rib shapes: equilateral‐triangular, trapezoidal, and square sectional ribs. The governing equations have been solved numerically using a finite‐volume technique via ANSYS FLUENT. For solving the transport equations of turbulent kinetic energy and its dissipation rate, the RNG k– turbulence model was utilized. At a broad range of Reynolds numbers (6000 ≤ Re ≤ 18,000), relative roughness height (), and a fixed relative roughness pitch (), the Nusselt number (), friction factor (), and thermal performance factor (TPF) have been examined. The maximal Nu was obtained for equilateral‐triangular ribs, while the minimum friction factor was seen for square sectional ribs. The highest TPF of 1.591 was achieved with equilateral‐triangular ribs at and e/Dh = 0.032. Contours of kinetic energy, turbulent intensity, velocity, and pressure produced significant findings for comprehending the SAH's physical phenomena.