Thermogravimetric investigation of sol–gel microspheres doped with aqueous glycerol

Abstract

Abstract Background Silica-based microspheres encapsulating aqueous glycerol are promising curing agents affording the formation of better one-component polyurethane foams, namely thermoset polymers cured by atmospheric moisture that are widely and increasingly utilized in the construction industry. The use of renewable, non toxic glycerol from biodiesel and oleochemicals industry to cure PU foams in place of traditionally employed oil-derived mono and diethylene glycols is both technically and environmentally beneficial. The higher amount of hydroxyl groups in glycerol compared to both mono- and diethylene glycol results in considerably lower percentage of free monomeric methylene diphenyl diisocyanate (MDI) and higher crosslinking density of the cured foam. Results We investigate by thermogravimetric analysis the nature and amount of the microencapsulated species in sol–gel silica and organosilica microspheres encapsulating aqueous glycerol. Along with a percentage of glycerol in weight up to 35%, the microspheres contain about 5 wt% water and 4 wt% entrapped surfactant. Conclusions The investigation shows the efficacy of the surfactant-assisted sol–gel microencapsulation aqueous glycerol in silica as well as in methyl-silica particles at least until 10% degree of methylation. The results are relevant to the practical development of functional materials that can be used to cure better and greener polyurethane foams largely employed as coatings, adhesives and sealants in many industrial sectors.