Abstract
In the present study, the pyrolysis behavior of Nigerian oil sands was investigated using thermogravimetric analysis. This was done with the aim of deriving kinetic models that can be relevant in the development of the natural resource. The effects of different heating rates (10, 20, and 30 °C/min) on oil sand pyrolysis were studied. The results of the study indicated that three regions comprising low-temperature oxidation, devolatilization, and high-temperature oxidation were obtained at all heating rates. The peak temperatures were observed to rise with an increasing heating rate, a phenomenon described as thermal hysteresis. Mineralogical analysis showed the presence of diffraction peaks corresponding to chlorite, quartz, aragonite, dolomite, calcite, and montmorillonite minerals and the notable absence of expandable clay minerals which are known to pose problems during tailing management and the aqueous bitumen extraction process. The kinetic analysis showed that the activation energy increased with the degree of conversion, with the highest activation energy of 14.682 kJ mol-1. The Coats-Redfern kinetic model gave the best model fit for oil sand pyrolysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.