Abstract
The thermoelectric power and AC electrical properties of conductive polymer composites made of polycarbonate filled with randomly distributed PAN-based carbon fibers of different concentration: 0, 5, 10, 18, and 30 wt% were studied. The thermoelectric power was measured as a function of temperature in the frequency range from 200 kHz to 12 MHz. It was found that the observed Seebeck coefficient and thermoelectric activation energy depend on temperature, frequency and fiber concentration. The Seebeck coefficient calculated using the electrical transport theory of semiconductors decreases with both increasing temperature and carbon fiber content. The thermoelectric power results revealed that the composites function electrically as semiconductors. Dielectric constants and AC conductivity were calculated from impedance and phase angle measurements. It was found that both increase with increasing temperature. The activation energy and relaxation time decrease with increasing temperature measured and applied frequency. The thermoelectric power results indicated that electrical conduction in bulk composites is produced from a combination of transport processes involving: electrons, holes, ions and charged impurity motion in addition to protonic migration.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
