Abstract

Abstract This study investigated the thermodynamic performance of a community-scale membrane-based brackish water reverse osmosis (BWRO) plant at various operating pressures from 13.79 to 27.58 bar and feed salinity levels from 2,000 to 20,000 mg/L. We aimed to identify the components responsible for the exergy losses and to suggest improvements. The results showed that the exergetic efficiency of some individual components had a significant impact on the performance of the desalination plant, where the high-pressure (HP) pump assembly and pressure control valve were identified as the major contributors to exergy losses (57.83–70.59 and 15.75–27.62%, respectively). The inefficiency of the feed pump assembly contributed to 11–12% of the total destruction of exergy under different operating conditions. The analysis further revealed that the exergetic efficiency of the plant was maximum (0.51%) at the feed salinity of 10,000 mg/L and operating pressure of 27.58 bar. It was minimum (0.01%) for the highest salinity (20,000 mg/L) and the lowest operating pressure (13.79 bar), due to the low requirement of work of separation and higher fixed losses. The exergetic efficiency was also correlated to the energetic performance of the BWRO plant at different operating conditions.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.