Abstract
The solar thermochemical CO2 splitting (CDS) is scrutinized via a redox ZnO/Zn cycle. The second law efficiency analysis is carried out by acquiring the required thermodynamic data from HSC Chemistry software. The main focus of this study is to explore the influence of reduction temperature (Tred), molar flow rate of inert sweep gas (n˙inert), and energy required for the gas separation on the solar-to-fuel energy conversion efficiency (ηsolar−to−fuel) of the ZnO/Zn cycle. All the calculations are conducted at a constant gas-to-gas heat recovery effectiveness (εgg) equal to 0.5. n˙inert required is recorded to be too high (5050 mol/s) at Tred equal to 1500 K and moderately low (15 mol/s) for Tred equal to 2000 K. The amount of thermal energy required to heat the inert/O2 gas mixture (from CDS temperature to separator-1 temperature) and inert sweep gas (from separator-1 temperature to reduction temperature) has a significant impact on the total thermal energy requirement of the cycle (Q˙TC). The rise in Tred from 1500 K to 2000 K shows a considerable decline in Q˙TC from 77417.5 kW to 1161.8 kW, respectively. Consequently, the highest ηsolar−to−fuel (17.0%) is recorded for Tred equal to 2000 K.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
