Abstract
This paper deals with thermodynamic modeling and proposal new configurations of an indirect water bath heater used in a city gate station (CGS) to preheat the natural gas (NG). In the transmission pipeline of natural gas before reducing NG pressure, it is necessary preheating to prevent hydrate formation. In the traditional systems, an indirect water bath heater is used for this purpose. Thermodynamic modeling of the proposed systems has been done in EES software, and an effective analysis based on proposed new configurations is conducted. The results indicate that using exhaust combustion products to preheat the combustion air can increase the thermal efficiency of the system from 46.36% (for base case) to 73.84%. In addition, with the use of an ORC to utilize the exhaust waste thermal energy, the system efficiency of 55.27% with an electrical output of 79 kW can be achieved. A comparison between configurations indicates that the second configuration (preheating combustion air) with 78.97 kg/h has the lowest emission rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
