Abstract
This study aimed to produce biopolyols from crude glycerol via a novel thermochemical conversion process. The effect of operational parameters, including sulfuric acid loading and reaction temperature and time, on the properties of the produced biopolyols was investigated. Biopolyols produced under preferred reaction conditions of 200°C, 90 min, and 3% sulfuric acid loading showed a hydroxyl number of around 481 mg KOH/g, an acid number of around 5mg KOH/g, and a viscosity of around 25.0 Pas. The resulting polyurethane (PU) foams showed a compressive strength of around 184.5 kPa and a density of around 43.0 kg/m(3), comparable to those of some petroleum-based analogs. Characterization of the biopolyols via pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), gas chromatography (GC), and thermogravimetrical analysis (TGA) showed that the major reactions of this process were the formation of monoglycerides and diglycerides through the esterification and transesterification of different components in crude glycerol.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
