Thermo-optical characterization of novel MXene/Carbon-dot hybrid nanofluid for heat transfer applications

Abstract

Nanofluid has emerged as a promising heat transfer fluid (HTF) due to their significant thermophysical, and optical characteristics enhancement over base fluids. Hybrid nanofluids with multiple nanomaterials have the advantage of synergistic properties in comparison to monocomponent nanofluids. The present study proposes an energy-efficient and cleaner synthesis method for developing carbon quantum dot (C-dot), MXene, and a hybrid MXene/C-dot hybrid nanofluids, for heat transfer application. In-situ microwave pyrolysis technique and two-step method were adopted for nanomaterial and nanofluid synthesis. The morphological, phase structural, chemical, and elemental compositional analysis of the nanomaterials was performed. The material characterization confirms the hybridization of C-dot on MXene nanosheets. The thermal conductivity and volumetric heat capacity of the nanofluids were measured using the transient plane source (TPS) method. Thermal conductivity was observed to increase with nanofluid concentration and temperature. Results indicate that MXene has the highest thermal conductivity enhancement (50 %) over water, followed by hybrid (42.2 %) and C-dot nanofluid (33.2 %). The volumetric heat capacity of nanofluids decreased with concentration and temperature. A semi-empirical correlation, as a function of nanofluid concentration and temperature, was coined for predicting thermal conductivity and volumetric heat capacity. Optical property characterization study shows that C-dot nanofluid exhibited considerable absorption along the UV range, while MXene nanofluid showed absorption in the visible and near-infrared (NIR) region. Hybrid nanofluids demonstrated complementary absorption properties of C-dot and MXene nanofluids.