Abstract
The thermo-mechanical fatigue (TMF) behaviour of the Nimonic 90 Nickel base superalloy has been investigated within two laboratories. In-phase-tests (IP) where the maximum mechanical strain occurs at the maximum temperature (850°C), and 180°-out-of-phase-tests (180° OP) where the maximum mechanical strain coincides with the minimum temperature (400°C) have been applied. All tests were carried out at varying mechanical strain ranges with a constant strain ratio of Rε = - 1. A temperature rate of 5 K/s was used throughout the whole cycle without any additional cooling system during decreasing temperature. The fatigue life of 180° OP tests is longer compared to identical IP tests. The stress / mechanical strain hysteresis loops are completely different and some characteristic values are compared to each other. The fracture surfaces observed show that fatigue crack (or cracks) starts on the external surface and propagates inwards. The fractures of 180° OP tests are transgranular showing the presence of fatigue striations, while the fractures of IP tests are mixed transgranular and intergranular with no fatigue striations.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
