Abstract
The concept of solar energy aided pumped thermal electricity storage (Solar-PTES) was proposed to improve the round-trip efficiency, as well as the solar energy utilization efficiency. The thermodynamic model was developed for such Solar-PTES system with the nominal electricity input of 5 MW and the nominal storage capacity of 6 equivalent hours. Taking the round-trip efficiency, energy density and levelized cost of storage as indicators for system performance, the effects of main design parameters were investigated, including that of main components performance parameters and cycle state parameters. The multi-objective optimization algorithm was applied for optimizing three performance metrics and the trade-off analysis was performed. The results indicates that the round-trip efficiency drops with the growing energy density, while the levelized cost of storage firstly decreases as the round-trip efficiency drops and then slightly rises. The minimum case of levelized cost of storage is selected for investigation. In that case, solar heat input is 5.05 MW and solar energy utilization efficiency of Solar-PTES system is 35.7 %. The nitrogen mass flow rate is 27.54 kg/s. The round-trip efficiency, energy density and levelized cost of storage for Solar-PTES system are 68.1 %, 16.63 kWh/m3 and 0.143 ± 0.023 $/kWh, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.