Thermally conductive composites with hydroxylated boron nitrides for the efficient thermal management of superconducting coils

Abstract

The thermal conductivity (κ) of polymer nanocomposites with boron nitride (BN) nanoplates is critically dependent on the distribution of BN in the polymer matrix. Here, we heavily functionalized BN nanoplates with hydroxyl groups by ultrasonication in solution with boric acid. Then, the hydroxylated BN nanoplates could be homogeneously distributed in an epoxy matrix, which improved the through-plane κ of 2.09 and 1.96 W/m·K at 25 and -90 °C, respectively. Processable composite resin with hydroxylated BN was utilized as an adhesive for a low-temperature superconducting (LTS) coil to enhance its normal zone propagation velocity (NZPV) and cooling rate performance. Consequently, fast heat dissipation through the adhesive between superconductors contributed to a 65.8% of increase in NZPV and a 13.1% improvement in the cooling rate of the device compared with a commercial adhesive.