Abstract
AbstractPhase‐change materials (PCMs) have been widely investigated as candidates for thermal energy storage and solar thermal energy conversion. However, low thermal conductivity and poor shape stability during phase transition processes are detrimental to their practical applications. In this study, we designed composite PCMs based on carbon foam (CF) via the vacuum impregnation method to overcome these problems. CF with 3D interconnected microporous structures and good compressive strength was fabricated from phenolic resin (PF) using a combined process of carbonization and sacrificial template techniques. The developer material is considered a promising support material for PCMs. The as‐prepared polyethylene glycol/CF composite (PCC) exhibited a high energy‐storage density with a melting enthalpy of 135.7 J/g, and the thermal conductivity was enhanced by 109.8% compared to that of pure polyethylene glycol. In addition, the PCC showed excellent thermal stability and leakage‐proof performance after 100 heating/cooling cycles and good compressive strength. Because of the simple preparation process and low cost, PCC is a promising material for various thermal energy storage applications, especially in building energy storage systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
