Abstract
The Cu-0.36Cr-0.15Zr alloy was prepared by solid solution, continuous extrusion and cold deformation. The microstructural evolution, microhardness and the thermal analysis were examined for the alloy after annealing treatment at different temperatures ranging from 300 oC to 700 oC. Experimental results show that the microstructure of the alloy remains stable after annealed below 500 oC due to the pinning effect of dislocations from the nanoscale precipitates. However, recrystallization and grain growth took place after a 600 oC annealing treatment when the precipitates grew up and lose inhibition of movement of dislocations and grain boundaries. Meanwhile, the higher dislocation density and finer grains introduced by continuous extrusion accelerate the recrystallization process compared with that prepared by the traditional rolling process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
