Abstract
A method was developed to simulate the rapid heating bio-oil fractions will undergo if upgraded using conventional petroleum refining processes. Bio-oil fractions were produced via fluidized bed fast pyrolysis of southern yellow pine sawmill residue. Thermal processing of the bio-oil fractions was evaluated at three temperatures (100, 200, and 300 °C) and two heating times (60 and 120 s). Thermal stability was defined as the increase in average relative molecular weight (RMW) of bio-oil samples after thermal treatment. The effect of moisture content and total acid number (TAN) on thermal stability was also investigated. Changes in chemical structures were observed via Fourier transform infrared spectroscopy (FTIR). Bio-oil fractions exhibited considerable instability at temperatures above 100 °C with substantial increases in average RMW for both 60 and 120 s heating times. The initial concentration of acids, as measured by TAN and ion chromatography (IC), was found to be the strongest predictor of thermal...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
