Abstract
The effect of hydrothermal aging and SO2 poisoning on the three-way catalytic performance of dispersed Pd/Rh-based and Pd/Rh perovskite-based catalysts were studied by using a dynamic activity test system that simulates redox fluctuations of gasoline engine exhaust conditions. Both catalysts were supported on ceria-zirconia-alumina and wash-coated on cordierite monoliths and were characterized by ICP-OES, BET, XRD, TEM-EDX, DRIFTS, and CO chemisorption. Their performance was very close when the catalysts were fresh but, after 3 h of hydrothermal aging at 1000 °C, the dispersed Pd/Rh-based catalyst lost its performance especially with respect to C3H8 and NO conversions; however, the Pd/Rh perovskite-based catalyst kept its activity. Parallel to that, CO uptake capacity losses after hydrothermal aging were 85% and 30% for the dispersed metallic catalyst and the perovskite-based catalyst, respectively. Moreover, 20 ppm SO2 exposure decreased CO uptake capacities by 61% and 48% for the two catalysts, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
