Thermal shock resistance study of stereolithographic additive-manufactured Al2O3 ceramics by in situ digital radiography

Abstract

Thermal shock resistance is critical to ensure the service safety of ceramic hot-end components. The thermal shock performance of stereolithographic additive-manufactured ceramics has not yet been studied. In this study, a series of thermal shock experiments with various temperature differences was conducted on stereolithographic additive-manufactured Al2O3 ceramics. The surface cracks were analysed based on photographs captured before and after the thermal shock experiments. Three-point bending tests with in situ X-ray digital radiography were conducted to determine the thermal shock resistance. Crack initiation, propagation, and coalescence were observed under flexural loads. The critical temperature difference of the stereolithographic additive-manufactured Al2O3 ceramics was determined to be 267.22 °C. The crack length increased and residual strength decreased with increasing temperature differences. The layered structure of the stereolithographic additive-manufactured ceramics slowed crack propagation. We expect that this study will serve as a reference for the performance of stereolithographic additive-manufactured Al2O3 ceramics in extreme environments.