Abstract
The durability of thermal barrier coatings (TBCs) is significantly influenced both by the ceramic top coat and the bond coat. In this study, novel YbGdZrO ceramic coats were deposited on the surfaces of three types of Cr-modified (Ni, Pt)Al bond coats via electron beam physical vapor deposition (EB-PVD) technique. These Cr-modified (Ni, Pt)Al bond coats were fabricated by magnetic sputtering Cr onto the (Ni, Pt)Al bond coats with varying sputtering times of 30, 60, and 90 min. The results indicates that the thickness of the Cr-modified layer increases with the extension of sputtering time. A short deposition time of 30 min is adequate for achieving an appropriate Cr content in the (Ni, Pt)Al bond coats, which ensures selective oxidation of Al element within the bond coat and further enhances the metallurgical interfacial bonding strength with the ceramic coat by adapting to the concentration gradient diffusion. However, as the sputtering time is extended to 60 and 90 min, α-Cr begins to form in the Cr-modified (Ni, Pt)Al bond coats, which negatively affects the oxidation resistance of the bond coat. Consequently, the thermal shock life of the TBCs samples is significantly reduced with increasing sputtering time. The longest thermal shock lifetime is obtained on the bond coat with Cr plating time of 30 min owing to a differing thermally grown oxide formation and failure mechanism.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
