Thermal resistance of building envelopes with heat-conducting elements in summer period

Abstract

The analysis of the current methods and techniques of solving the problem of heat resistance of building envelopes with heat-conducting elements shows the solution of a onedimensional problem of heat resistance. One of the possible methods for determining the temperature fluctuation amplitude on the inner surface of the building envelopes with heatconducting elements is the modeling of non-stationary temperature conditions in the computer program. However, this solution causes great difficulties, as it transfers the specified calculation from engineering to scientific and cannot be recommended for practical application. The second method of solving this problem is the application of the convergence coefficient, which can be obtained empirically. The selection of the convergence coefficient allows for the influence of the heat-conducting elements on the weighted average surface temperature depending on the envelope configuration.The structural analysis of the building envelopes and their impact on the averaged amplitude of oscillations on the inner surface are conducted. The arrangement of heat-conducting elements at the outer edge is characterized by a negligible influence of the vibration amplitude on the averaged amplitude over the structural surface. The arrangement of heat-conducting elements greatly affects the heat-conducting elements. According to the comparative analysis, the convergence coefficient is preferable in harmonics of the average temperature fluctuations on the inner surface.