Abstract
AbstractIncorporation of rick husk ash (RHA) fillers into polypropylene affected some of the thermal properties of polypropylene composites. Addition of the black rice husk ash (BRHA) filler raised the thermal degradation temperature while maintaining the oxidative stability. The thermal degradation temperature of the white rice husk ash (WRHA) composites was found to be independent of filler loading but the oxidative stability deteriorated with increasing filler content. DSC studies indicated that both white and black RHA fillers act as weak nucleation agents and increase the degree of crystallinity of polypropylene by a small margin. Addition of the RHA fillers reduced the linear thermal expansion coefficient of the composites. Dynamic mechanical studies showed that the RHA composites with higher filler content have higher storage modulus. Tan δ curves of the composites indicated that WRHA filler increased the damping property while the BRHA filler had an opposite effect.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.