Thermal properties and failure mechanism of graphene nanoplatelet-reinforced copper composites fabricated using electroless plating

Abstract

Copper matrix composites reinforced with graphene nanoplatelets (GNPs) were fabricated using an electroless plating method, and the effects of the GNP content on the thermal conductivity (TC), coefficient of thermal expansion (CTE), and mechanical properties of the composites were studied. The TC, CTE, and strength of the composites were measured in the in-plane and through-plane directions and compared. Increasing the GNP content in the GNP/Cu composite was effective in reducing the CTE and increasing the compressive yield strength of the composite. The compressive yield strength was higher in the through-plane direction, but the maximum compressive strength was higher in the in-plane direction. In the case of compressive deformation in the in-plane direction, a single shear fracture with one fracture direction occurred. The compressive deformation in the through-plane direction of the composite with high GNP content (15% and 20%) exhibited a duplex shear fracture with two fracture directions. The significant findings of the present study are that it is possible to fabricate GNP/Cu composites with uniformly dispersed GNPs and low porosity by electroless plating. In addition, the failure mechanism of GNP/Cu composites was revealed for the first time.