Abstract
The thermal performance of multilayer PVD tungsten and molybdenum coatings on graphite was studied for the application of first wall in nuclear fusion devices. The coatings with a thickness of 5 μm and different numbers of W/Mo layer were prepared and a series of plasma thermal loads from 1.3 to 4.1 MWm-2 was applied. Microstructure changes caused by thermal loadings were analyzed. Scratch test was then conducted to quantify the changes in the adhesion. The microstructural analysis and scratch test results showed that the thermal performance of the coatings varied depending on the degree of heat loads and coating structure. A molybdenum interlayer improved the coating adhesion while the plasma heat resistance of the double-layer W/Mo coating was slightly better than the others.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.