Abstract
ABSTRACTLatent heat thermal energy storage (LHTES) systems using a phase change material (PCM) can reduce the heat-transfer rates during charging/discharging processes because of their inherently low thermal conductivity. In this study, heat-transfer enhancement using various configurations of longitudinal fins employing both a PCM and a nano-PCM in a large triplex-tube heat exchanger (TTHX) was numerically investigated via the Fluent 15 software. The results showed that the thermal conductivity of the pure PCM (0.2 W/m K) can be observably enhanced by dispersing 10% alumina (Al2O3) to 25%. Therefore, the melting time is reduced to 12%, 11%, and 17% for the internal, internal-external, and external fins, respectively, compared with the case of the PCM without nanoparticle. It is concluded that the model of external fins-nano-PCM embedded in a large TTHX is the most efficient model for achieving complete PCM melting in a short time (188 min), where improving the thermal performance to 14% and 11% compared with the TTHX with internal and internal-external fins-nano-PCM, respectively. The simulation results are validated and agree well with experimental results for the PCM and nano-PCM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
