Abstract
An experimental investigation of a novel V-groove absorber plate with pin-fins on double-pass solar air collector was made to study the enhancement of thermal performance. The objective of this work is to develop a solar air collector for drying agricultural products with enhanced heat transfer rate by employing pin-fins on V-groove absorber plate under varied configurations. The parameters that influence the instantaneous thermal efficiency of the collector are discussed, and obtained results are compared with a conventional V-groove absorber plate for same mass flow rate values. Energy and exergy analyses were also carried out. The results show that the efficiency of the collector depends strongly on the flow rate. Also, it is noted that for a flow rate of 0.035 kg s−1, the novel V-groove absorber plate with pin-fins installed on both sides exhibits extended heat transfer area, thereby a rise in average thermal efficiency by 17.4%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.