Abstract
An experimental study is performed to investigate the performance (thermally and electrically) of a small-scale li-ion module (3s2p) using passive thermal management strategy of phase change material (PCM)/graphite matrix. The PCM/graphite matrix was obtained by impregnating the graphite matrix (bulk density: 75 g L-1) with phase change material (paraffin/organic, RT-35). The performance tests of a li-ion module are conducted at 1C and 1.6C discharge rates for graphite matrix composite with phase change (phase change composite or PCM/graphite matrix) and also air cooling, comparatively. To illustrate the performance of the PCM/graphite matrix, transient temperature variations, thermal imaging, discharge capacity, and energy capacity are achieved comprehensively. The results illustrate that graphite matrix composite with phase change has a significant contribution to melting heat transfer, operating temperature, utilized capacity, and energy capacity compared to air cooling. Effective thermal conductivity of PCM/graphite matrix is increased 35 times by comparison with pure paraffin. Operating temperature and temperature gradient throughout the li-ion surface decrease by 22 % and 43 % compared to the air cooling, respectively, for high discharge rate. Operating time and energy capacity is increased 33 % and 28% compared to natural air cooling, respectively, for high discharge rate. It is also disclosed that dominant heat transfer mechanism is conduction depending on micro/nano-size porous structure of graphite matrix.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
