Abstract
Polymer concrete or epoxy granite is becoming more popular for beds, bases, and other structures of precision machine tools, owing to its excellent damping characteristics. To realize the same static rigidity as that of the cast-iron structures, steel-reinforced epoxy granite (SREG) structures are being used. The vast differences in the thermal properties of steel and epoxy granite (EG) are likely to cause higher magnitudes of thermal error. This work aims to investigate the thermal behaviour of a computerized numerical control (CNC) lathe built with a novel dynamically enhanced SREG bed and compare its performance with the lathe with a cast iron bed. Experimental and numerical investigations have been carried out under cross-feed (CF) drive idle running conditions to determine the TCP deformation. The results reveal that the thermal error in the CNC lathe with SREG bed is 1.68 times that of the lathe with cast iron (CI) bed at 20 ºC and 1.8 times at 40 ºC environmental temperature variation chamber (ETVC) conditions. It could be identified that the heat generated in the CF is conducted to the steel guideways embedded in the SREG bed, but further heat transfer to the EG portion of the bed is impeded, and hence the heat accumulation that occurs in the guideways leads to higher magnitude of the thermal error. The experimentally validated numerical model is used to extend the investigations to study the effect of the idle running of the longitudinal feed drive (LF) and combined cross and longitudinal feed drives, on the thermal behaviour of the lathe.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Strojniški vestnik - Journal of Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.