Abstract
PurposeThis paper aims to investigate the lubrication performance of cam/tappet contact during start up. Especially, the thermal insulation effects of coating on the lubrication performance during cold start up process and warm start up process are studied.Design/methodology/approachA numerical model for the analysis of thermal elastohydrodynamic lubrication of coated cam/tappet contact is presented. In this model, the Reynolds equation and the energy equations are discretized by the finite difference method and solved jointly.FindingsDuring start up, the contact force at cam nose-to-tappet contact decreases with increasing time, while the absolute entrainment velocity has the upward trend. The minimum film thickness, maximum average temperature and friction power loss increase with increasing time, while the coefficient of friction decreases during start up. Because of the thermal insulation effect, the coating can significantly increase the degree of temperature rise. Compared with the uncoated case, the coated cam/tappet results in a lower friction power loss. Generally, the friction power loss in the cold start up process is much higher than that in the warm start up process.Originality/valueBy this study, the lubrication performance and the kinematics and the dynamics of the cam/tappet during start up process are investigated. Meanwhile, the thermal insulation effect of coating is also illustrated. The difference of lubrication performance between cold start up process and warm start up process is analyzed. The results and thermal elastohydrodynamic lubrication method presented in this study can be a guidance in the design of the coated cam/tappet.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.