Abstract
This work attempts to investigate the thermal hydraulic safety of lithium lead ceramic breeder (LLCB) test blanket system (TBS) in International Thermonuclear Experimental Reactor (ITER) with the help of modified thermal hydraulic code relap/scdapsim/mod4.0. The design basis accidents, in-vessel and ex-vessel loss of coolant of first wall (FW) of test blanket module (TBM) are analyzed for this safety assessment. The sequence of accidents analyzed was started with postulated initiating events (PIEs). A detailed modeling of first wall helium cooling system (FWHCS) loop and lithium lead cooling system (LLCS) is presented. The analysis of steady-state normal operation along with 10 s power excursion before the accident is also discussed in order to better understanding of initial condition of accidents. The analysis discusses a number of safety concerns and issues that may result from the TBM component failure, such as vacuum vessel (VV) pressurization, TBM FW temperature profile, passive decay heat removal capability of TBM structure, pressurization of port cell and Tokomak cooling water system vault annex (TCWS-VA) and to check the capability of passive safety system (vacuum vessel pressure suppression system (VVPSS)). The analysis shows that in these accident scenarios, the critical parameters have reasonable safety margins.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Nuclear Engineering and Radiation Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
