Thermal hydraulic design of a liquid salt-cooled flexible conversion ratio fast reactor

Abstract

A 2400 MWth liquid-salt cooled flexible conversion ratio reactor was designed, utilizing the ternary chloride salt NaCl–KCl–MgCl 2 (30–20–50%) as coolant. The reference design uses a wire-wrapped, hexagonal lattice core, and is able to achieve a core power density of 130 kW/l with a core pressure drop of 700 kPa and a maximum cladding temperature under 650 °C. Four kidney-shaped conventional tube-in-shell heat exchangers are used to connect the primary system to a 545 °C supercritical CO 2 power conversion system. The core, intermediate heat exchangers, and reactor coolant pumps fit in a vessel approximately 10 m in diameter and less than 20 m high. Lithium expansion modules (LEMs) were used to reconcile conflicting thermal hydraulic and reactor physics requirements in the liquid salt core. Use of LEMs allowed the design of a very favorable reactivity response which greatly benefits transient mitigation. A reactor vessel auxiliary cooling system (RVACS) and four redundant passive secondary auxiliary cooling systems (PSACSs) are used to provide passive heat removal, and are able to successfully mitigate both the unprotected station blackout transient as well as protected transients in which a scram occurs. Additionally, it was determined that the power conversion system can be used to mitigate both a loss of flow accident and an unprotected transient overpower.