Abstract
This paper proposes a design of passive cooling system for CPR1000 spent fuel pool (SFP). Our design can effectively manage the SFP temperature not to exceed 80 °C. Then the transient analysis of the CPR1000 SFP with designed passive cooling system is carried out in station blackout (SBO) accident by the best-estimate thermal-hydraulic system code RELAP5. The simulation results show that to maintain the temperature of CPR1000 SFP under 80 °C, the numbers of the SFP and air cooling heat exchangers tubes are 6627 and 19 086, respectively. The height difference between the bottom of the air cooling heat exchanger and the top of the SFP heat exchanger is 3.8 m. The number of SFP heat exchanger tubes decreases as the height difference increases, while the number of the air cooling heat exchanger tubes increases. The transient analysis results show that after the SBO accident, a stable natural cooling circulation is established. The surface temperature of CPR1000 SFP increases continually until 80 °C, which indicates that the design of the passive air cooling system for CPR1000 SFP is capable of removing the decay heat to maintain the temperature of the SFP around 80 °C after losing the heat sink.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
