Abstract
Abstract In this work, a three-dimensional study is conducted for silicon ingot irradiation facility in a typical MTR reactor. The silicon ingot heat generation is allowed to change around its nominal value in the range of 0.25, 0.5, 0.75, 1.0, and 1.25 W/g. The dimensionless clearance ratio ζ between the ingot and the outer casing is changed for values of 0.01, 0.05, 0.1, 0.15, and 0.2. The computational fluid dynamics code ANSYS FLUENT is employed to carry out these calculations. The temperature profile inside the silicon ingot during irradiation is of significant importance for uniform doping. Therefore, the impact of Rayleigh number and dimensionless clearance ratio ζ on the radial and axial temperature profiles through the ingot is reported. A best estimate correlation for the silicon irradiation facility global Nusselt number in terms of Rayleigh and dimensionless clearance ratio is presented. The dimensionless clearance ratio ζ value of 0.05 gives the best thermal hydraulic performance. Comparison with the available experimental correlations in the literature shows good agreement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
