Abstract
Existing commercial parabolic trough power plants use thermal oil as a heat transfer fluid, with working temperatures in the region of 400 °C. In order to achieve more efficient generating systems, a second generation of parabolic troughs that operate at temperatures higher than 400 °C is being developed. One possibility Abengoa Solar is assessing is the use of direct steam generation (DSG) inside parabolic troughs in order to achieve higher temperatures; in a first stage heating up to 450 °C and in a second stage heating up to 550 °C. For the future market potential of parabolic trough power plants with DSG, it is beneficial to integrate thermal energy storage (TES) systems. Different TES options based on the most known technologies, steam accumulators, molten salts (MS), and phase change materials (PCM), are presented and compared in this paper. This comparison shows as main conclusion of the study that a combined system based on PCM-MS has a clear advantage in the ratio with 6 or more equivalent hours of storage, while with lower than 6 h, steam accumulators are considered the best option.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
