Abstract
AbstractTo establish the coating conditions for57Co, non-radioactive Co ions are dissolved in an acid solution and electroplated on to a rhodium plate. The thermal diffusion of electroplated Co into a rhodium matrix was studied to apply a57Co Mössbauer source. The procedure to form a Co deposited onto Rh foil was established using two different electroplating baths: the acid-based buffer (pH 3) containing boric acid, sodium chloride, and saccharin, and the alkaline-based buffer (pH 10) containing hydrazine hydrate and ammonium citrate. The influence of different annealing conditions was investigated. From the results, the best diffusion degree of electrodeposited Co onto the rhodium matrix was obtained in an annealing process performed at 1100°C for 3 h in vacuum over 10−5hPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.