Thermal dewetting as a method of surface modification of the gold thin films for surface plasmon resonance based sensor applications

Abstract

Here, we report a quick and simple approach with low, optimized production costs to obtain surface plasmon resonance (SPR) based sensors fabricated through a time- and resource-effective method based on thermal dewetting of thin Au films. From the applicative point of view, the method of detection presented here should be easier to implement, since light transmission measurements seems to be much less challenging than light refractive index changes measurements conducted by many authors. Metallic films with nanometric thickness were deposited by magnetron sputtering method on a Corning 1737 glass substrates. Plasmonic nanostructures were formatted as a result of thermal annealing of the films. The detection repeatability, selectivity, and sensibility of manufactured devices were investigated. For this purpose, many verification tests were performed. The quality of the plasmonic nanostructures used for the detection was examined by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), and ultraviolet-visible spectroscopy (UV–VIS). X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) spectra showed the absence of any signs of structure degradation after several cycles of detection in the liquid environment. The surface plasmon resonance position of the achieved sensors was linearly changeable in correlation with the ethanol concentration, which translates into their high robustness. Such a simply prepared sensing device showed key features desired in the detection in the liquids area, which opens up the possibility of large-scale commercial production.