Abstract

A melamine polyphosphate (MPP)/dipentaerythritol (DPER) mixture was used as fire retardant additives for preparing waterborne intumescent fire resistive coating. The thermal degradation of the MPP/DPER mixture and of the coating was studied by TGA and FTIR. The resulting char of the coating was investigated by XPS, SEM and energy dispersive spectroscopy (EDS). The results showed that the thermal degradation behavior of the MPP/DPER mixture was similar to that of the coating. They decomposed to nonflammable gases, and formed intumescent char layer containing phosphorus oxide at high temperature. The EDS results proved that the resulting char was gradually oxidized with the temperature increase. The SEM micrographs showed that the average cell size of the char layers became bigger and the cell size distribution became wider as the temperature increased from 500°C to 800°C, and this non-uniform char layer could damage the fire protection of the coating.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.