Thermal degradation processes of end-capped poly(L-lactide)s in the presence and absence of residual zinc catalyst.

Abstract

Thermal degradation processes of end-capped poly(L-lactide)s (PLLAs) were investigated by means of several thermoanalytical techniques under both isothermal and nonisothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes at temperatures below and above 330 degrees C were existed in the nonisothermal degradation for PLLA samples depending on the amounts of residual zinc compounds from synthesis process. Isothermal degradation experiments at different temperature regions showed that the sample weight of PLLA decreased linearly with time in both cases, whereas the changes in molecular weight revealed different tendency for the temperature. On the basis of characterization of the residual PLLA molecules after isothermal degradation at 330 degrees C, it was confirmed that the omega chain end of the residual molecules was an acrylic ester unit. Majority of volatile products during thermal degradation of PLLA was the lactide regardless of the degradation temperature. From these results, it is concluded that, during the thermal degradation of PLLA samples in the presence of large amounts of residual zinc compounds, the zinc compounds catalyze both the intermolecular transesterification generating PLLA with low molecular weights and the selective unzipping depolymerization of PLLA with low molecular weights at temperatures below 330 degrees C. In contrast, the primary reaction of thermal degradation for PLLA in the absence of residual zinc compounds above 330 degrees C is a competition between the random chain scission via a cis-elimination reaction and the cyclic rupture via intramolecular transesterification of PLLA molecules. In addition, it was evidenced that the racemization of lactic acid units in the main chain of PLLA molecules occurred at temperatures above 330 degrees C.